Clover Floor Sealant Clear Varnish
5 Litre
- Clear Varnish Floor Sealant
- A Solvent-based, advanced floor sealant that creates a durable, gloss finish.
- Easy to clean and maintain, Clear Varnish will improve the appearance and extend the life of a floor.
- Use to varnish sealed and unsealed wood, hardwood, parquet and block floors.
- Recommended for use in sports halls, gymnasia, school and church halls, leisure centres, etc.
| eFill Controlled Dose Concentrates Control costs and eliminates waste. The eFill range of controlled dose concentrates gives you all the cost-effective cleaning power you need in one neat little package.The handy-size 1 litre bottle will fill up to 100 triggers, see full range >> |
Clover Floor Sealant Clear Varnish solvent-based, advanced floor sealant that creates a durable, gloss finish.Formulated for varnishing wooden floors, including hardwood parquet and block floors in sports halls, gymnasia, church and school halls, leisure centres etc
Clover Floor Sealant Clear Varnish Features:
- Increases floor life
- Makes surface easy to clean and maintain
- Suitable for wood, parquet and block floors
- A Solvent-based, advanced floor sealant that creates a durable, gloss finish.
- Easy to clean and maintain, Clear Varnish will improve the appearance and extend the life of a floor.
- Use to varnish sealed and unsealed wood, hardwood, parquet and block floors.
- Recommended for use in sports halls, gymnasia, school and church halls, leisure centres, etc.
Directions
Untreated Wood/new Floors: Thoroughly mechanically sand with the grainand vacuum clean. Ensure that all oil, grease or wax deposits are removed by solvent washing then allow to dry. Stir well before use. Thin the first coat with
20% of White Spirit to aid penetration. Apply two full coats by brush or roller, ensuring the sealant spreads evenly to prevent pools forming. Lightly sand the surface between coats.
Previously Varnished Floors: If the existing varnish is sound, lightly sand with the grain and wash with White Spirit. If the varnish is flaking, remove by burning off or apply a paint stripper. Sand with the grain and wash with White
Spirit. Stir well before use. Apply two full coats by brush or roller, ensuring the sealent sprads evenly to prevent pools forming. Lightly sand the surface between coats.
The coverage is approximately 12m per litre per coat.
The sealant should be allowed to dry for a minimum of 8 hours before the application of an additional coating.
Allow 16 hours for the final coat to hard dry.
N.B. NOT SUITABLE FOR OVERCOATING WITH 2 PACK LACQUERS.
 Enov Colour Coding Chart - Standard (Size: 642 KB) | Download Enov Colour Coding Chart - Standard |
