Clover Floor Sealant Red Paint 5L
5 Litre
- Red Floor Paint
- An advanced floor sealer, which produces a tough, hard-wearing surfaces to increase floor life.
- A solvent-based, high quality floor paint, which is based on tough polymers that cross link to form a continuous finish on the floor.
- Ideal for use on concrete, stone, wood, cork and steel structures.
- Recommended for use in areas with heavy traffic, such as; garages, showrooms, factories, schools, warehouses, hospitals and public buildings.
eFill Controlled Dose Concentrates Control costs and eliminates waste. The eFill range of controlled dose concentrates gives you all the cost-effective cleaning power you need in one neat little package.The handy-size 1 litre bottle will fill up to 100 triggers, see full range >> |
Clover Floor Sealant Red Paint Pigmented Urethane Alkyd Blend an advanced floor sealer, which produces a tough, hard-wearing surface to prolong floor life.
Clover Floor Sealant Red Paint Features:
- An advanced floor sealer, which produces a tough, hard-wearing surface to prolong floor life.
- A solvent-based, high quality floor paint, which is based on tough polymers that cross link to form a continuous finish on the floor.
- Formulated for use as a light duty coating for garages, showrooms, factories, schools, warehouses, workshops, hospitals and public buildings.
- Not suitable for exterior use or very wet areas, ie swimming pools or shower rooms.
Directions:
Ensure good ventilation when applying the product. Surfaces should be clean, dry and dust free. Thoroughly remove any grease, oil or wax residues. Clean concrete floors should be etched with a solution of Clover's Acid Wash 80, rinsed with clean water and allowed to dry thoroughly before application of the paint.
If applying to a painted finish, perform an adhesion check. If the paint adheres, wash, degrease and roughen the surface before applying the Grey Floor Paint. If adhesion fails, remove paint before applying Grey Floor Paint.
Apply by brush or roller, ensuring the sealant spreads evenly to prevent pools forming.
The first coat will penetrate and bind the surface in depth and a second coat will provide a continuous over-seal. Brushes and rollers should be washed in white spirit before drying.