Unsmoke Wall Wash W/ Biosolv 3.8L
5 Litre
- Wall Wash with Biosolv
- Cleans smoke damaged hard surfaces, tough enough to remove heavy smoke and grease residues on painted surfaces, metal, concrete, tile, sealed or unsealed wood, hard floors and wet cleanable fabrics.
- Powers through greasy soils on carpets and upholstery.
- Gentle enough to use as a traffic lane cleaner or upholstery pre-spray.
- Wall Wash is formulated with proprietary brightening and deodorizing agents for cleaning smoke-damaged hard surfaces.
| eFill Controlled Dose Concentrates Control costs and eliminates waste. The eFill range of controlled dose concentrates gives you all the cost-effective cleaning power you need in one neat little package.The handy-size 1 litre bottle will fill up to 100 triggers, see full range >> |
Wall Wash with Biosolv
Cleans smoke damaged hard surfaces, Tough enough to remove heavy smoke and grease residues on painted surfaces, metal, concrete, tile, sealed or unsealed wood, hard floors and wet cleanable fabrics. Powers through greasy soils on carpets and upholstery. Gentle enough to use as a traffic lane cleaner or upholstery pre-spray.
Wall Wash is formulated with proprietary brightening and deodorizing agents for cleaning smoke-damaged hard surfaces. This product is especially effective for prepping walls for painting ? it quickly removes both oily and dry soot, and does not require rinsing when used as directed. Especially effective for cleaning up after grease fires. A truly multi-use product, Wall Wash can also be used as a powerful degreaser for parts washing and can be added to any cleaning agent to boost odor control.
Use Instructions
As a wall cleaner:
1. Remove excess smoke and soot using a lamb?s wool duster or HEPA filter vacuum.
2. After testing the contamination level and surface durability, add 4 oz. and up to 32 oz. (125 to 1000 mL) to each gallon (3.8 L) of water depending on the severity of the job.
3. Apply diluted Wall Wash with a wall cleaning machine, or spray on, and wipe down.
4. Rinsing with water is recommended if used at higher concentrations, or if used to clean high-touch surfaces.
As a booster:
1. Mix 8 ounces (250 ML) of Wall Wash per gallon (3.8 L) to any ordinary cleaning solution for use on walls, floor or other hard surfaces.
2. Rinsing with water is recommended if used at higher concentrations, or if used to clean high-touch surfaces.
Dilution - Various (4oz. to 32 oz. per gallon)
Flash point - >201? F | 94? C
Appearance - Transparent liquid; green colour
pH - 12.8
Specific gravity - 1.032
 Enov Colour Coding Chart - Standard (Size: 642 KB) | Download Enov Colour Coding Chart - Standard |
